Saturday, June 14, 2014

Paper Bow using We R Memory Keepers Envelope Punch Board

 
 Once I made one bow I was sold! This is such an easy project and I love that I can use my punch board for other things! Thanks to our Gresham store that had this figured out the moment they got the board. Here I have listed simple steps on how to create your own paper bow!
Paper Bow Tutorial using We R Memory Keepers Envelope Punch Board by Sarah Owens for @craftsavvy #craftwarehouse #wermemorykeepers #punchboard #diy #scrapbooking
Supplies:
  • We R Memory Keepers Envelope Punch Board
  • Paper Cutter
  • Scrapbook or Cardstock paper
  • Beacon 3in1 Glue
 Directions:
  1. Collect everything on your supply list.
  2. Cut paper into 3 strips: 1 - 1"x6" and 2 - 1"x5" strips
  3. Match up your 6" strip to punch board at the 3" mark and punch.
  4. Flip over and punch the other side.

     5.  Take the ends of the paper and trim edges like shown in photo 5
     6.  Repeat steps 3-5 for one 5" strip
     7.  Repeat steps 3-4 for the other 5" strip. Then punch a notch in each end shown in photo 7
     8.  This is what your pieces should look like in photo 8
 
    9.  Place dot of glue on the back side of large strip, then fold over to adhere paper
   10.  Repeat this step for the smaller strip
   11.  Glue one bow on top of the other and glue paper strip to the bottom
   12.  A perfect bow!





No comments:

Post a Comment

Thank you for your feedback! We love hearing from you!

LinkWithin

Related Posts Plugin for WordPress, Blogger...
Blogging tips