Halloween Cones

Happy Halloween!

Supplies:

Undecorated Kraft Cones
Halloween Paper
Mod Podge
Black Paint
Foam Brush
Ribbon
Martha Stewart Scoring Board
Terra Cotta Pots for Trees
Dowels
Candy Corn
E6000 Glue

Directions:

Cover the cone with paper and cut to fit the cone. Use Mod Podge to cover the cone with the paper. Use the Mod Podge as glue and as a sealer. Smooth the paper down with your fingers before it dries if it starts to wrinkle. Decorate your cones with ribbon. Paint the dowels and pots black. Let dry. Glue the dowel to the inside of the cone at the point and glue to the other end of the dowel to the bottom of the pot for stability. Fill the pots with candy corn. Tie ribbon around the pots. Use the scoring board to create paper rosettes. Enjoy!

Art Supply Organization

Supplies:

Tin Trays
Fabric Swatches
Jam Jars
Ribbon
Wire
Mod Podge
Big Bite Crop-A-Dile or Drill
Foam Brush

Directions:

Brush a thin layer of the Mod Podge to the center section of the tray and lay the fabric in the glue. Let dry. Using the Big Bite or a drill make two holes at the top of the trays to insert the ribbon for hanging. Also drill two holes about an inch apart in the center where the top rim the jar will lay. Wrap the wire around the top of the jar a couple of times then wire the jar to the tray through the two drilled holes. Put your art supplies in the jars. If desired label your jars with masking tape. Hang the trays with ribbon and enjoy!

My Mind's Eye Lost and Found 3

 

1 & 2 - My Mind's Eye Lost and Found 3 Collection
3. The House of Smiths Thanksgiving Decorating & Crafts
4. My Mind's Eye Lost and Found 3 Collection
 

Recipe Card Holder and Christmas Countdown Trays

Recipe Card Holder

Supplies:

Tin Tray
Red String (to hang)
Green String (for bow)
Patterned Paper
“Recipes” sticker letters or vinyl
Bottles Caps
Buttons
1” Hole Punch
Aleene’s Tacky Glue
Magnets
Big Bite Crop-A-Dile or Drill
Recipe Cards

Directions:

Cut holes into the tin tray. Tie the red string in the holes to hang the tray. Tie a bow out of the green string and glue to the corner of the tray. Apply “Recipes” to patterned paper and cut out, then glue it to the top of the tray. Use the 1” circle punch to punch out circles from your paper. Glue the circles into the bottle caps. Glue the bottle caps and buttons onto magnets. Use the magnets to hold your favorite holiday recipes as you’re cooking!

Christmas Countdown Tray

Supplies:

Tin Tray
Patterned Paper
25 Small Flat Backed Red Marbles
E6000 Glue
25 Small Magnets
White Paint Pen
“25 Days of Merry” Stickers or Vinyl
Ribbon

Directions:

Cut the paper to fit the back of the tray. Glue down. Apply the “25 days of merry” to paper, cut out and glue to top of tray as header. Glue 25 red marbles to magnets. Let dry. Write numbers 1-25 on the magnets with the paint pen. Put the numbered magnets on the tray each day as a countdown to Christmas! You could also put small notes behind each magnet to read each day.

Wicked Weekend Giveaway

 

This giveaway is now closed. moxielark is our Wicked Weekend Giveaway winner picked via Random.org! Happy Halloween and thanks for playing along!

Happy Halloween! To celebrate we have a "Wicked" giveaway! We would like to give away two Cling Mounted Rubber Stamp Sets of The Magic of Oz by Hampton Art, six rolls of Glitter Ribbon by American Crafts, and one Doodlebug Plain and Simple Chipboard Album to one lucky winner!

To enter to win, you can...

1. Comment here with your email address in the comment so I can get in touch with you. Or if it is in your blogger profile, that is ok. Make sure to type it email(at)address(dot)com. Thank you.

2. Share our giveaway via Facebook by clicking "share" on our Facebook post, then come back here and tell us that you did.

3. Share our giveaway via Twitter, then come back here and tell us that you did.

4. Pin our giveaway via Pinterest, then come back and tell us that you did.

The winner will be picked via Random.org on October 29th, 2012!

*We ship in the US only thank you.

Christmas Burlap Frame

Supplies:

Undecorated Burlap Frame
Small Chipboard Frame (or cut your own frame out of a chipboard sheet)
Vinyl “Love” Saying
Patterned Paper
Binder Clip
Ribbon Strips
Burlap Ribbon
Button
Hot Glue Gun & Hot Glue Sticks

Directions:

Trace the chipboard frame onto the patterned paper and cut out. Glue the paper onto the frame. Apply the vinyl onto a solid color paper and glue it onto the burlap frame. Glue the chipboard frame over the vinyl saying. Wrap the burlap frame around the base of the frame and glue to hold in place. Create the burlap flower with three 3” strips of the burlap ribbon. Pinch each strip in the middle and glue to give texture. Layer the strips on top of each other and glue in place. Glue the button over the middle of the flower. Glue a binder clip onto the burlap frame. Tie ribbon to the binder clip. Clip a photo and enjoy your project.

Halloween Candy Bar

Supplies:

Assorted Glass 
Candy (we used Sixlets) 
Vinyl 
Candy Scoops 
Candy Bags
 
Directions:

Apply the vinyl to your glass.
Fill with Candy.
Let your party guests fill a goodie bag at your next party!

Burlap Serving Tray

Designed and Created by Dania for Craft Warehouse

Supply List:

 

16x20 barn wood frame

16x20 glass

foam board 16x20

piece of burlap 19x23

6 door pulls (two handled and four round)

 

Simple Instructions:

 

Wrap burlap around foam board and tape to the back side of the foam board.

Place glass into frame then add wrapped foam board and staple into the back of the frame.

Use E6000 glue to adheare on 2 handles on the top and the four on the bottom of the frame.

Block Basics

Take unfinished blocks and use pictures, paint or embellishments for a display! 40% off regular prices of blocks until October 28th, 2012. (Regular prices from 50 cents - $4.99)

Santa Cones

Designed and Created by Sarah Owens for Craft Warehouse

Shopping List

· A small, medium & large paper cone.

· Red acrylic paint

· Martha Stewart glue & fine red glitter

· 1 yard 1” black ribbon

· 1/4 yard 1/2” black ribbon

· 2 yards of white marabou

· 2 packs of Darice clear square rhinestones

Tools

· Scissors

· E-6000 glue & glue gun

 

Cone Instructions

· Paint the cones with red acrylic paint.  Set aside and let dry.

· Once completely dry, take the Martha Stewart glue and apply on cone.  From there, coat in glitter.  Sprinkle off excess.  Set aside and completely dry.

· Take your black ribbon.  Wrap around the middle of each cone.  Glue the ribbon with E6000.  Let it dry.

· Place rhinestones on card stock paper in square formation.  Cut paper around the rhinestones to create the buckle. 

· Take white marabou (or a boa) and cut to fit the bottom of the cone.  Use up top!  Glue on and then dry!

* 40% off regular prices on Paper Mache Cones until October 28th, 2012

12 Days of Christmas by My Mind's Eye

This giveaway is now closed! Thank you for playing along! Our winner picked via Random.org is 

MendiOctober 19, 2012 10:41 AM

Loved this collection! :) 

It is time to celebrate the weekend again with another giveaway! This Weekend Giveaway, we have My Mind's Eye 12 Day's of Christmas collection to give to one lucky winner! This prize pack includes 17 double sided cardstock paper, 1 package of decorative brads, trims, and clear stamps! That is over $40 of Christmas supplies!

To enter to win, you can...

1. Comment here with your email address in the comment so I can get in touch with you. Or if it is in your blogger profile, that is ok. Make sure to type it email(at)address(dot)com. Thank you.

2. Share our giveaway via Facebook by clicking "share" on our Facebook post, then come back here and tell us that you did.

3. Share our giveaway via Twitter, then come back here and tell us that you did.

4. Pin our giveaway via Pinterest, then come back and tell us that you did.

The winner will be picked via Random.org on October 22nd!

*We ship in the US only thank you.

Heidi Swapp Memory File Class by Jennifer Evans

Last Saturday I had the privilege to teach a Heidi Swapp Memory File class. Remember the Memory File pictured below? Well, this was the sample for this class.

 

 

 I knew we needed coffee to start us off on the right foot, so I stopped at Starbucks first. ;)

 

Unfortunately, the creamer tipped in the car and ruined all the coffee supplies. So, we had to stir the extra creamer I bought with our pinkies. ;)

I got to get a chance to spend time with some ladies that are come to our local Scrapbook Club.

Then, I got to meet some new friends that I only see via Instagram and online. Some traveled pretty far to visit! I felt super honored to meet them "in person!"

I love how each member personalized their file. Not one Memory File looked the same!

 



 

My dear friend and Craft Warehouse Design Team Member, Michelle, came to the class along with her mom! Can you believe her mom came from the Bay Area to spend time with her daughter and took the class with her? Sweet, right?!

I love how some came totally prepared with rolls of washi tape... just in case. ;)

We were taking photos with my phone and I had to have a picture taken of my dear twin sister, Becca. She is so amazing. She helped set up the class, break it down, and during class made sure that everyone was helped. Love you sis!

Craft Warehouse rented out the empty building next door so we could have room to do the class. We had plenty of room to work, talk, and play!

Thank you so much Craft Warehouse and to all those that came! It was a great time and I look forward to doing it again!

Burlap and Canvas Jars

 

Designed and Created by Dania Carson for Craft Warehouse

 

BURLAP COVERED JARS

 Supplies:

• Canning Jar or glass vase
• Beacons® 3in1 glue (I love this glue! My favorite for these burlap projects.)
• ½ yd pre-cut roll of burlap
• Canvas Home Basics® Canvas Fringe ribbon
• Jute twine

1. Measure the distance around the jar and the distance to the top. I made sure to measure to the top of the rim so I could hide the threads on my canning jar.
2. Cut burlap to the height of the jar and 1/2” larger around than your jar measurement.
3. Run a line of Beacons® 3in1 glue from top to bottom of the jar, around the bottom edge and then around the top edge of the jar. I found it easiest if I put my hand inside the jar and held it off the table while I did this.
4. Lay the burlap on the jar so the edge of burlap is on the glue line that runs from top to bottom and then roll burlap around the jar and smooth into place. Run another glue line top to bottom along where the burlap overlaps to hold it in place.
5. Measure the distance around the neck of the bottle and cut the fringe ribbon ½” longer than the measurement. Glue the ribbon in place with the Beacons® 3in1 glue.
6. Tie a length of jute twine over the top of the fringe ribbon for decoration.

Depending on the size of your jars you can cover several with the ½ yd of burlap.

 

* Burlap 1/2 yard cuts 2 for $5 (reg $3.49) until October 28th, 2012.

Scarf Necklaces

 

A simple, stylish project with only three pieces:

1. Choose a pre-cut ruffled scarf.

2. Pick a pendant to slide to the center of the scarf.

3. Pick accenting bails and rings to add weight to the scarf ends.

* Sale prices good until October 28th, 2012. Pre-cut Ruffle Scarves $5 (reg. $6.99). Entire Stock Pendants 50% off regular prices. Scarf Necklace Ends, Bails & Rings, buy one get one free (reg $1.49)

Pebbles Inc. Walnut Grove

1&2: Pebbles Inc. Walnut Grove Collection

3. Kim Jeffress for Pebbles Inc.

4&5: Pebbles Inc Walnut Collection

Pebbles Inc. Seen & Noted

Celebrate the everyday with this weekend's giveaway by Pebbles Inc., Seen & Noted. This prize pack includes 12 double sided paper, 2 packages of ABC Stickers (in black and turquoise), 24 Journaling Cards, 24 Phrase Cards, Masking Tape Stickers, Chalkboard Speech Bubble Stickers, Chipboard Word Bubbles, 8 Tags and Pockets, and 1 sheet of Accent & Phrase Stickers. That is over $50 of supplies that will go to one lucky winner!

To enter to win, you can...

1. Comment here with your email address in the comment so I can get in touch with you. Or if it is in your blogger profile, that is ok. Make sure to type it email(at)address(dot)com. Thank you.

2. Share our giveaway via Facebook by clicking "share" on our Facebook post, then come back here and tell us that you did.

3. Share our giveaway via Twitter, then come back here and tell us that you did.

4. Pin our giveaway via Pinterest, then come back and tell us that you did.

The winner will be picked via Random.org on October 15th!

*We ship in the US only thank you.

Authentique's Enchanted Boo Holiday Decor by Guest Designer SaLee Phillips

 

This was a fun, quick and pretty simple project to make. These letters can be hung on the wall, adhered to piece of wood, or on a deco mesh wreath! Lots of options with these MDF letters.

1. Paint the letters black with the acrylic paint

2. Coat each letter with Mod Podge and cover with a sheet of decorative paper
 

3. Using an exacto knife, cut out the letter (you can trace the letter on the paper and cut with scissors if you prefer, but I like to to use a craft knife for a more precision cut).
 

4.  Using Tim Holtz distressed ink in Black Soot and the applicator tool, distress the edges of the letters with the ink to give it more depth. Please add these two items to the supply list).
 

5. Once the paper is adhered to the letter, coat with Mod Podge and sprinkle with Martha Stewart Glow in the Dark Glitter (add this item to the supply list)
 

6.  Letter "B":  stick on the Jolee's haunted tree, crows and moon; hot glue the feathers to the top left corner; put sticker on metal cameo (this was something I had left over) but when I did a workshop, I cut out a cameo shape from a Cricut cartridge and used Stampendous Glitter Glass on it---it turned out even better than the metal one I used; add the October 31st sticker to the tree.
 

7.  Letter "O":  wrap some spider webbing around the letter; hot glue the stickers on; stamp was the My Minds Eye new Halloween stamp which I stamped with black and put Glossy Accent Crackle on (another sticker from the collection can also be used in place of the stamp); I also put the crackle on the big sticker; stick on a few spiders from Jolees and black flowers from Petaloo (add to list of products)
 

8.  Letter "O":  Glossy Accent the stickers; used the Alcohol Ink patina  (black and ocher) to the metal skulls then hung them on the O with a small chain; spray some black Mister Hueys on the gauze and place under the sticker---another GREAT option is using black tulle or use both for more fun!