Simple Stories Snow Globe Card by Guest Designer Michelle Wofford

 

Hi, Michelle again with a fun festive card tutorial. When I received the Handmade Holiday Collection by Simple Stories and saw I received some of their 4" x 6" transparencies I knew I wanted to make a snow globe card.

 

Supplies:

Cardstock

Patterned Paper

Coordinating Transparency

Paper Trimmer

Scissors

Ruler

Pencil

Ribbon

Coordinating stickers

Adhesive

pop up adhesive (optional)

Stickles Glitter Glue

 

To start this card let's trim the card base and patterned paper we need.  Trim the following sizes...

1 piece of cardstock - 4" x 6"

1 piece of cardstock - 2" x 4"

1 piece of patterned paper - 2" x 4"

 

Next use a circle cutter or make a template using a lid to cut a circle about 3 3/4" in diameter from the transparency.  Make sure to include as much of the fun design on the transparency as you can.

 

 

 

 Next take your 2" x 4" pieces and use your pencil to mark them at 1/4" and 3 3/4" on the long side.  Use your paper trimmer to trim the pieces from the marked line to the bottom corner to create a taper.

 

 

 

Now you can attach your transparency circle to the back of the patterned paper piece.  Just put a bit of adhesive and attach, then adhere the tapered cardstock piece to the inside back, this hides the adhesive and helps secure the transparency. 

 

 

Now take your 4" x 6" piece of cardstock and score at 1/2" using the Martha Stewart score board.  Use the bone folder on score for a crisp fold line.

 

 

 

Next take the front of the card you created with the transparency and base, lay it on top of the 4" x 6" piece and use your pencil to trace the pattern onto the base.  Make sure to hold the 1/2" fold down and trace the top of the circle onto it.  Depending on how low you placed the circle on the front piece, your base may be a little long, make sure you line it up from the top and trim excess off the bottom.

 

 

Trim the traced outline with micro tip scissors.  Place a bit of adhesive on the flap and attach the two piece together.

 

 

Get a piece of scrap patterned paper or small piece of patterned paper from the collection and use your pencil to free hand a snow cap.  Trim with scissors and attach to front of card.

 

 

 

 

Use pop up adhesive to adhere the snowman sticker to the inside of the card. 

 

 

Add some snowflakes.

 

 

Add some ribbon / twine and a button sticker to the base.

 

 

 

Now add some Stickles Glitter Glue, I used the Platinum color here to compliment the beige tones.  Outline the snow cap on the top and add little specks to the center of each snow flake and in other random spots on the transparency. 

 

 

That's it, now you have a fun snow globe card anyone would love for the holidays.  I'd love to see any snow globe cards you create so feel free to share here or on the Craft Warehouse Facebook Page!

 

Thanks for looking, Michelle

 

Canvas Love

1. Pugly Pixel; 2. Canvas Corp Kraft and White French Script Patterned Paper; 3. Studio Calico, Abroad Line*; 4. Simple Stories Mix & Match Memorabilia Pockets*; 5. Canvas Corp Muslin Canvas Mini Tags

*Note: 25% off Studio Calico & Simple Stories products through June 17th.

Three Cards Under 30 Minutes by Design Team Member Cara Goedeking

Cara Goedeking from the Craft Warehouse Design Team is here to share with you three fun and simple birthday cards that you can make in approximately 30 minutes.

I started with a few basic products:

Kraft Cardstock (2 pieces of 12x12)
Paper Cutter/Trimmer
Scissors
Corner Rounder
Adhesive Foam Tape
3 Toothpicks & Twine

And then bought these additional products for this project:

Simple Stories "Happy Day" Stickers

Simple Stories "Happy Day" 4x6 Journaling Card Elements

Simple Stories "Kraft Grid" paper (from Fabulous line)

Jillibean Soup "Stewed Cabbage" paper (from Sweet & Sour Soup line)

FIRST CARD:

Start out by making the card base out of the Kraft Cardstock. Trim to 12" x 4-3/8" and fold at 6".

Cut the banner journaling card out of the patterned paper. Trim the card to 5-1/2" in length x 4" in height (Note: trim a bit from each side)

Round the corners on the right hand side with your corner rounder.

Remove the "celebrate", "Good Times", brown scalloped border, red star and cupcake from the sticker sheet.  Cut some small pieces of foam tape, and adhere them to the back of all except the brown scalloped border (make sure on your "celebrate" sticker you do not put any foam tape behind the "e" at the end).

Use adhesive to secure the journaling block to the card base. Then use foam tape and adhere the cupcake sticker and the "celebrate" sticker as shown below. 

 Next secure the brown scalloped border (no foam tape on back) to the upper left side as shown below. Layer the "Good Times" sticker on top.

To finish card off attach the star (with foam tape) on top of the cupcake flag. Wrap some twine (I wrapped 3 times) around the stem of the flag, tie bow, and trim ends. You are finished with your first card!

SECOND CARD:

Start out by making the card base out of the Kraft Cardstock. Trim to 12" x 4-3/8" and fold at 6" (just like the first card).

Cut the ice cream journaling card out of the patterned paper. Trim the card to 5-1/2" in length x 4" in height (Note: trim a bit from each side--to the end of each "bracket").

Trim a 2"(width) x 3-1/2" (height) strip from the Jillibean Shredded Cabbage paper. 

Cut a 2" (width) x 1" (height) strip of paper from the Simple Stories "Kraft Grid" paper.

Use adhesive to secure the small "Kraft Grid" piece to the top of the "Shredded Cabbage" piece. Use the red scalloped border from your sticker sheet (see below), lay it on the tag (overlap a bit of the "Kraft Grid" piece) and trim end. Cut a triangle shape out of the end of "Shredded Cabbage" piece to form a banner.

Wrap a piece of twine around the banner tag, tie a bow and trim ends.

Remove the ice cream cone, blue striped star and "fun!!" stickers (not all shown below) from the sticker sheet. Put foam tape on the back of the banner tag and the stickers (except the "fun!!").

Round each corner of the journaling tag & use adhesive to secure to card base. Use the foam tape to secure the banner tag to the top center of the card.

Add the ice cream cone and then the "fun" sticker on top of it. Next add the star. Your 2nd Card is now complete!

THIRD CARD:

Start out by making the card base out of the Kraft Cardstock. Trim to 11" x 4" and fold at 5-1/2".

Cut out the scalloped tag journaling card out of the patterned paper. Trim to 5-1/2" (width) by 4" (height).

Use adhesive to secure the journaling tag to the card base. Use foam tape to secure the "Happy Birthday" sticker to the card (see below).

Use a toothpick and the orange striped banner sticker from the sheet...

...to create a toothpick flag by placing a toothpick in the center (a little offset to the right side) and folding the sticker over on itself.

Here is your finished flag.

Tuck the flag behind the "happy birthday" sticker.

Make another toothpick flag out of the blue striped banner sticker and another toothpick.

Cut the end off another toothpick to make a bit shorter. Then remove the pinwheel from the sticker sheet, and put two layers of foam tape on the back of the sticker (leaving a small space in the center for the toothpick).

Secure the pinwheel and the blue striped toothpick flag to the card (also tucked behind the "happy birthday" sticker).

Add the 3 dot stickers (see below...bottom left corner) to make the "confetti" on the card. Your 3rd card is now complete!

Hope you enjoyed creating these three easy cards with me today!